Thor Technologies DRM1050 10A Hardwired DIN Rail Ripple Filter (1050Hz)

Stop LED Flickering and Protect Your Smart Automation Infrastructure

Have you noticed your premium LED lights randomly flickering, your ceiling fans humming loudly, or your smart dimmers acting erratically at specific times of the day? You aren’t dealing with a software bug your electrical mains are likely being hit by Ripple Control Signals injected into the SE Queensland power grid by Energex.

The Thor Technologies DRM1050 is a premium, hardwired DIN rail-mounted solution specifically engineered to isolate, target, and neutralize 1050Hz ripple frequencies. By silencing this dirty power right at your switchboard, it restores flawless stability to your home’s lighting systems and sensitive electronics.

Why the Thor DRM1050 is Essential for Modern Smart Homes

As high-end automation networks grow, so does their sensitivity to grid interference. Electricity utilities regularly send low-level signal voltages (ripple controls) through the power lines to manage off-peak loads. While necessary for the grid, these signals wreak havoc on automated lighting control systems.

The DRM1050 acts as a targeted shield for your entire electrical circuit, eliminating grid interference without affecting your standard 230V/240V power supply.

Key Performance Benefits:

• Eliminate LED Lighting Flicker: Eradicates the annoying pulsing, rapid dimming, or flashing caused by utility grid signaling.

• Protect Automation Processors: Keeps your lighting processors running smoothly, eliminating mystery dropouts or communication glitches.

• Optimize Dimmer Performance: Dramatically improves your LED dimming range, smooths out the dimming curve, and enhances "cold start" consistency when using phase-cut dimmer modules.

• Quiet Noisy Motors: Reduces or eliminates audible humming and buzzing from ceiling fans, air conditioners, and ventilation equipment.

Expert Integration by Brisbane Smart Homes

Because the DRM1050 is a hardwired 10A unit that integrates directly inside your main electrical panel, it must be installed by a licensed professional.

As premium integration specialists, the team at Brisbane Smart Homes doesn't just sell hardware we ensure your entire power environment is perfectly calibrated. Our in-house expert technicians can seamlessly integrate the Thor DRM1050 into your main switchboard, providing clean, stable, unpolluted power directly to your Control4, C-Bus, or Dynalite systems. 

Need Professional Installation? Talk to the team at Brisbane Smart Homes today about booking one of our licensed, in-house technical installers to safely upgrade your switchboard.

Product Specifications:

• Model: DRM1050

• Application: Indoor / AC Mains

• Active Filter Frequency: 1050Hz (Optimized for 1050Hz utility grid zones, common across parts of SE QLD)

• Supply Voltage: 230V / 240V AC 50Hz

• Maximum Current Rating: 10 Amps

• Maximum Connector Rating: 10 Amps

• Mounting Type: DIN Rail Mountable (105mm wide enclosure)

• Dimensions: 96mm (H) x 105mm (W) x 60mm (D)

• Operating Temperature: -10°C to +60°C

• Warranty: 1-Year Thor Replacement Warranty

Buyer’s Tip (How to Choose Your Frequency):

Power utility companies use different frequencies depending on your specific state, region, or suburb. The two most common frequencies used across Australia and New Zealand are 1050Hz and 750Hz. If you are unsure which signal is causing your lights to flicker, contact Brisbane Smart Homes our team can help identify the correct frequency filter required for your specific property and location.